Hallo Herbert! On 25.04.2024 11:41, Herbert Poetzl wrote:
Hey, Ich hab gestern zwei Mikrokontroller aus dem Bauteilsortiment geholt und avrdude/USBASP hat sie nicht erreicht.
Was genau heisst 'nicht erreicht'?
Mein setup: https://0x0.st/XHmI.JPG mein alter m328p bernhard@b:~$ avrdude -c usbasp -p m328p avrdude: AVR device initialized and ready to accept instructions avrdude: device signature = 0x1e950f (probably m328p) avrdude done. Thank you. metalab m328p bernhard@b:~$ avrdude -c usbasp -p m328p avrdude error: program enable: target does not answer (0x01) avrdude error: initialization failed, rc=-1 - double check the connections and try again - use -B to set lower ISP clock frequency, e.g. -B 125kHz - use -F to override this check avrdude done. Thank you. metalab t85 bernhard@b:~$ avrdude -c usbasp -p t85 avrdude error: program enable: target does not answer (0x01) avrdude error: initialization failed, rc=-1 - double check the connections and try again - use -B to set lower ISP clock frequency, e.g. -B 125kHz - use -F to override this check mein alter t45 avrdude done. Thank you. bernhard@b:~$ avrdude -c usbasp -p t45 avrdude: AVR device initialized and ready to accept instructions avrdude: device signature = 0x1e9206 (probably t45) avrdude done. Thank you.